Cheap and Easy Photography Studio

And I really mean cheap and easy.  OK, not free.   I did have to buy some plastic place mats on Amazon. But I got 12 for $18.00 which leaves plenty left over to use as place mats and as traveling work surfaces for polymer.  That, packing tape and white card  stock which I had (you could use printer paper too) and I was all set.

1PlasticPlacemats

I have one of those cloth photo tents like this one  and they are great for taking pictures of vases and bigger items.    But it’s big and unwieldy in my studio and I actually had to watch a video on how to fold it and get it back into its storage bag.    I wanted a smaller photo cube for jewelry and similarly sized items.   I could have bought something, but could not find the size I wanted.  It seems like these things come in two sizes:  tiny and enormous.

That meant making one.  I didn’t want to have to buy special paper.  I didn’t want to have to find the right size box and saw the sides out of it.  When I was finished taking pictures,  I wanted to stow the box in a drawer or on a bookshelf.  So here’s what I came up with:

2Placemat photo setupHere’s the photo setup.  I cut the place mats to size with scissors and used packing tape to make this triptych-like screen.  4open

Here’s the set up with white paper behind the triptych under it.  You can use paper and the other mats to make any kind of configuration you like.  Just tape them together.  You can put the lights anywhere to get the effect you want.  The light I am using here is nothing fancy.  It’s an LED desk lamp I bought at Five Below and it uses three AA batteries which means you can move it anywhere and not be fighting with wires.  You can get something similar on Amazon here.  Don’t pay more than $5.00 per lamp.  They’re great for traveling to which is why I originally bought them.   And don’t think you need to buy  lights if you already have something you can use.

 

So, how do the pictures look?  Let’s see.

Shooting Earrings

Here’s a setup to shoot a pair of bronze clay earrings suspended on a piece of floral wire.

The image on the left is unlit.  I used the lamp on the image on the right.  I didn’t use any photo editing software.

Here are the same images Gimped.  Click on the images a couple of times to view them full size.  Gimp is a free open-source image editor that I have used for years.  It can do anything you want.  Did I mention that it’s free?

3Folded up

This is the photo studio folded up and ready to be put away.  It hardly takes up any room at all.  If you need something bigger,  just tape on another mat or two.  If you want something smaller, cut one down.

Here’s another idea.  The plastic drawers in this storage unit are also made of translucent plastic.  Before I started using the place mats,  I got some pretty good shots using empty drawers. Plastic drawers

1Tassel on box

Here’s a tassel I laid on one of the empty drawers.  You don’t have use a place mat on the drawer like I did; simply turn it over if the underside is free from markings.  You can try putting your small, battery-operated lamps inside or outside the drawer.  Experiment.

 

2Tassel on Box closeup

Here’s a shot of the tassel with some light from the battery-operated lamp.  Not too bad.  One of the great things about these photo setups is that they are small and cheap enough to take outside into the natural light where you should be able to get some pretty good results.  Experiment!  And don’t forget to have fun.

 

 

 

Triangle Beaded Beads

I have been experimenting with cross weaving which is sometimes referred to as two needle right angle weave.  It definitely uses a different set of “head muscles” than single needle RAW, but it’s not that difficult to learn.    Below are some examples of beads that I discovered by accident while trying to do something else.    My beads are not new discoveries; I have since found other examples of them  on the Internet.

Triangle weave is not right angle weave strictly speaking because the beads are not pointing at right angles,  but it lends itself to a great deal of possibilities depending on the size and shape of the beads you use, how long you keep repeating the pattern, and the manner in which you repeat the pattern.   You can also weave a pattern similar  similar to hexagon angle  weave that to my eyes resembles more of a star pattern than regular hexagon weave.  Then again, these are more likely the same  patterns but they look different to me  depending on whether I use oval-shaped beads or round beads.

The two beaded beads below are extremely simple to make.  The one you see here  is made from six  beads.

I have been experimenting with cross weaving which is sometimes referred to as two needle right angle weave. It definitely uses a different set of “head muscles” than single needle RAW, but it’s not that difficult to learn. Below are some examples of beads that I discovered by accident while trying to do something else. My beads are not new discoveries; I have since found other examples of them on the Internet.

 

This bead is made from nine beads and I have added some seed bead accents.  

The 12 bead beaded cube is the easiest one of all to make.  Here is a good video tute to get you started.

Give these beads a try if you are interested in learning some of the more complex bead cross weaving.

Beads of a Different Stripe

I have been busy trying  lamp working techniques this summer.  Striped beads are made differently than I would have thought.  Instead of drawing stripes on the bead with a stringer you  lay down dots, put on a layer of  clear glass and melt it slowly.  This serves to magnify the dots underneath which appear as stripes!  How cool is that?  Here are the basic steps:

Base bead

Make a base bead

First dotsAdd some dots.  Don’t melt in.

dotsAdd dots on top of dots.  Don’t melt in.

 Clear wound aroundAdd a couple layers of clear over the dots only.  Think of a shape like the planet Saturn with its rings.

 wind

 Begin to heat the clear glass.  Slowly so the glass doesn’t pop or crack.

 wrapsBring up the heat to melt the clear glass.  This magnifies the dots underneath

TorchingPick it up a bit and keep the mandrel turning.

heatingWhy?

Stripes taking shape2Because you don’t want your bead to sag.

Stripes taking shape

Let the bead cool slowly and keep it turning to maintain the shape

coolerAlmost finished.

Beads2   And here are the finished beads.  This could get addicting!

Don’t forget Bead Fest this weekend!